If developing JPEG / TIFF files, cameras other than those listed below can also be used.

*1	...	The WB setting value of the camera is not acquired.
*2	...	Although the WB value setting of the camera is acquired, AWB is treated as sunlight.
*3	...	The WB setting value of the camera is not acquired. The compression record mode of RAW is also not acquired (These cameras support several RAW recording methods such as 13.5MP, 6MP, 3.4 MP, etc., but this software only supports 13.5MP DCR).
*4	...	Since this model is a special type with high sensitivity for infrared ray, the color reproduction may not work well on the object having a strong infrared radiation.
*5	...	Supported DNG is limited.
*6	...	In some mode, the number of recorded pixels is different from the development result created by the camera internal.
*7	...	Attached with R8 or R9 only.
*8	...	In case of sRAW and mRAW, the part feature is limited. Demosaic sharp is not available.
*9	...	Images whose file formats are sRAW or mRAW may not be developed properly, when the images are taken under specific light sources such as tungsten light.
*10	...	The size of "RAW S" is not supported currently.
*11	...	SILKYPIX determines color temperature and color deflection according to "TONING" settings in camera. These values are our assumed values for white balance of RAW images. These assumed values do not guarantees that the image quality of developed RAW images is the same to JPEG images which are recorded at the same time. SILKYPIX supposes that color temperature and color deflection for RAW images are 5200K and 3 when "TONING" is disabled.
*12	...	For a RAW image with the size of "RAW S", several features such as a demosaicing sharpness are unavailable.
*13	...	Support only RAW images with 3FR file format. (RAW images with FFF file format are not supported.)
*14	...	RAW images shot with "Pixel Shift Resolution" are not supported.